Using fewer cameras to capture each side of an object has become a common requirement in the machine vision market. This requirement is used in beverages, industries such as pharmaceuticals and automobiles are already very common.
In response to this demand, there is a mature solution for the CHIOPT, which only needs one lens, one single camera can image the outside of an object’s ring or the inside of a perforated object with perfect clarity.
The 360°outer wall lens is applied to the peripheral view imaging of small objects, and the image of the outer wall of the measured object is captured through the catadioptric system, and then imaged. At the chip, it appears as a circular crown image.
The larger the diameter of the measured object, the higher the measurable height. The diameter of the measured object can be photographed: 7.5mm-30mm, and the measurement height: 5.3mm-25mm.
In traditional machine vision solutions, to capture the outer wall information of an object, multiple cameras are required to capture one surface of the object, and then
Synthesize the pictures, use the 360° outer wall lens, and only need one camera to perfectly present the outer measurement of the object ring in one image, without the need for multiple
One camera and multiple lenses effectively simplify the layout of the vision system and reduce costs.
This lens is ideal for inspecting pharmaceutical bottles, plastic caps, necks, preforms, screws, and mechanical parts, among others.
Character detection outside the ring
Medicine bottle detection
Coil outer wall detection
Bottle cap inspection
Medicine bottle cap detection
The 360° inner wall lens is used to shoot the bottom of the inner hole and its vertical inner wall, which can detect the inside from the outside without putting the lens into the hole department.
Thanks to the large viewing angle (82°) and innovative optical design, this lens has a large depth of field, which can fully capture the top and bottom of the object at the same time.
The larger the diameter of the measured object, the higher the measurable height. The diameter of the measured object can be photographed: 5mm-120mm, and the measurement height: 5mm-123mm
The 360° internal wall lens is the perfect solution for inspecting objects such as cylinders, holes, bottles, threaded items and mechanical parts.
Motor detection
Bottle cap inspection
Thread detection
Rubber detection
Ceramic testing
Finally, we must emphasize that we always provide professional customization service,such as:
area scan lens
scheimflug lens
anti-vibration lens
optical lens customization
lens customization
Our Website: www.chiopt.net
0 条评论